Go to page [1] [2] [3]

Barnstead MC239X1 Proportional Mantle Control. (Inv #8654) Single outlet for control of heating mantles that do not have a controller. Out put is percent-on, range 3-100%. Maximum output is 115V, 1000W. Very good used condition, fully checked, cleaned, guaranteed. Price: $69.00

Barnstead #4002110 Labquake Tube Shaker/Rotator (Inv #8835) Small clip bar style rotator for thorough mixing of blood samples, preparation of homogenous dispersions, dialysis under agitation, and liquid-liquid extractions. Accommodates tubes from 10 to 30mm, also Vacutainer* tubes. Comes with 4 clips. Speed: 8rpm. Dim: DxWxH, 4 x 11 x 6 in. Power req.: 120V, 50/60Hz, 0.1A, 12W. Excellent used condition, fully checked, cleaned, guaranteed. Price: $145.00

Barnstead Thermolyne Mirak Digital Ceramic Top Stirrer 49sq. in. (Inv # 7854) The Mirak stirrer accommodates up to a 7 in. diameter flask, and a top plate load to 25 lb. Speed is electronically controlled from 60-1200 rpm, and displayed on the control panel with an accuracy of +/- 4rpm. Just dial in the desired speed on the display, and then push the knob in to start the stirrer. Ceramic top is corrosion resistant and easy to clean. Power req. 120V, 50/60Hz. 0.33A. Excellent used condition, fully checked, cleaned, guaranteed. Price: $295.00

Barnstead Thermolyne S72525 Mirak Digital Ceramic Top Stirrer 49sq. in. (Inv # 8099) The Mirak stirrer accommodates up to a 7 in. diameter flask, and a top plate load to 25 lb. Speed is electronically controlled from 60-1200 rpm, and displayed on the control panel with an accuracy of +/- 4rpm. Just dial in the desired speed on the display, and then push the knob in to start the stirrer. Ceramic top is corrosion resistant and easy to clean. Power req. 120V, 50/60Hz. 0.33A. Excellent used condition, fully checked, cleaned, guaranteed. Price: $295.00

B. Braun Thermomix 1480 Heating Immersion Circulator - High Temperature to 250C°. (Inv #8793) Convert any bath <21L into a heated circulating bath with the Thermomix 1480. Circulation will improve bath temperature uniformity. Temperature stability ±0.004°C @37°C. Fine temperature adjust to get your setting spot-on. Compact immersion circulator with 6" rod for use with a ring stand. Dual action: use the recirculating pump to circulate liquid from the bath into another application, or circulate external liquid from another application through the circulators heat exchange coil. Not intended for culinary use. Temperature range -50 to 250°C can be used with non-flammable/non-combustible high temperature bath fluids. Power req.: 120V, 60Hz, 1100W. Very good used condition, fully checked, cleaned, guaranteed. Price: $375.00

Bellco Glass "Bell-Stir" Single Position Magnetic Stirrer. (Inv #7937) Continuously adjustable stirring speed with separate On/Off switch to preserve speed setting for repetitive samples. 6" X 6" top. Power req. 120V, 50/60Hz. Very good used condition, fully checked, cleaned, guaranteed. Price: $85.00

Bellco Glass "Bell-Stir" Single Position Magnetic Stirrer. (Inv #7939) Continuously adjustable stirring speed with separate On/Off switch to preserve speed setting for repetitive samples. 6" X 6" top. Power req. 120V, 50/60Hz. Very good used condition, fully checked, cleaned, guaranteed. Price: $85.00

Bellco Model 7760-06005 4-Place Magnetic Stirrer. (Inv #8261) Compact 4-place magnetic stirrer measures only 10-1/4" X 10-1/4" X 5" high, yet has room for up to four 1 Liter vessels. Very good used condition, fully checked, cleaned, guaranteed. Price: $395.00

Bellco Model 7765-00102 "u-Carrier" Biological Magnetic Stirrer. (Inv #5269) Two-place slow-speed stirrer is designed for suspension, cell culture and microcarriers. Continuous stirring is controllable from 0 to 150rpm (no load) and includes front panel mounted tachometer and auxiliary electrical outlet in the rear. Top measures 24-1/2" X 10" with room for two 9" diameter (4000ml to 5000ml) vessels. The unit measures 5-1/2" high. Power Required: 110V 50/60Hz 1A. Good used condition, checked, guaranteed. Price: $395.00

Bellco Model 7765-06065 "u-Carrier" Biological Magnetic Stirrer. (Inv #5255) Large 4-place slow-speed stirrer is designed for suspension, cell culture and microcarriers. Continuous stirring is controllable from 0 to 150rpm (no load) and includes front panel mounted tachometer and auxiliary electrical outlet in the rear. Top measures 19-1/2" X 19" with room for four 9" diameter (4000ml to 5000ml) vessels. The unit measures 5-1/2" high. Power Required: 110V 50/60Hz 1A. Good used condition, checked, guaranteed. Price: $495.00

Bellco Model 7765-06065 "u-Carrier" Biological Magnetic Stirrer. (Inv #7326) High-capacity, heavy-duty single-place slow-speed stirrer is designed for suspension, cell culture and microcarriers. It is sized especially to fit inside most CO2 incubators and includes a convenience electrical outlet on the back that allows daisy chaining of up to ten stirrers. Continuous stirring is controllable from 15 to 150rpm (no load) and includes front panel mounted tachometer. Top measures 19-1/2" X 19" and include side safety rails and a non-slip mat. Capacity: up to 36-liter vessels. The unit measures 11-1/2" high. Power Required: 110V 50/60Hz 1A. Good used condition, checked, guaranteed. Price: $495.00

Boekel Model 260010 "Microcooler II" Refrigerated Water Bath. (Inv #8386) Provides reliable and convenient control at the sub ambient temperatures required for nick translation, ligation and transcription. Water-tight cooling chamber functions as a refrigerated mini-bath. Uses Peltier thermoelectric cooling, a design requires minimal or no maintenance. Continuously adjustable temperature from 4 to 20 °C is displayed on a large LCD readout. Very good used condition, fully checked to 4°C, cleaned, guaranteed. Price: $495.00

Boekel Model 260011 "Microcooler" Refrigerated Water Bath. (Inv #7830) Provides reliable and convenient control at the sub ambient temperatures required for nick translation, ligation and transcription. Water-tight cooling chamber functions as a refrigerated mini-bath. Uses Peltier thermoelectric cooling so there is only one moving part, and requires minimal maintenance. Continuously adjustable temperature from 20 to 4°C is displayed on a large LCD readout. Very good used condition, fully checked to 4°C, cleaned, guaranteed. Price: $245.00

Brinkmann Horizon Vari-Mag Stirrer. (Inv #8332) Low profile stirrer uses advanced magnetic coil technology. A low profile of 1-5/8", and a low power consumption of 6W, makes this stirrer an excellent choice for use in an incubator, as well as on the bench. Speed: 100-1000 rpm, and will remain constant even if viscosity changes. Capacity (maximum): 3L., Dim (stirring surface): 5" dia. Operating conditions: Stirrer: -10 to 56°C, 0-100% humidity; Power supply: 0-40°C, not to exceed 80% humidity. Polyamide coated. Power req.: 120V, 60Hz, 11.4W, includes AC adapter. Excellent used condition, fully checked, cleaned, guaranteed. Price: $99.00

Brinkmann/Lauda RE106 Refrigerated Circulating Bath. (Inv #8813) Designed for immersion use or for external circulation to maintain temperature levels in lasers, spectrophotometers and other lab equipment. 200W cooling capacity. Very small footprint to conserve bench space. Features: built-in compressor, proportional integrated differential PID control that compensates for variable heat load and set-point drift, platinum resistance temperature sensor, pre-set and variable temperature control with digital readout for temp and set-point, and overtemp/low liquid cut-offs. Temperature Range: -20 to +120 deg C, Reservoir Cap: 6L, Top Opening: 6" X 5", Over-all dimensions: 15-7/8"L x 7-7/8"W x 21-7/8"H. SS Cover included. Power req: 115v, 50/60hZ, 1400W. Excellent used condition fully checked from -19.2C to +106C, cleaned, guaranteed. Includes manual. Price: $1195.00

Brinkmann/Lauda RE106 Refrigerated Circulating Bath. (Inv #8814) Designed for immersion use or for external circulation to maintain temperature levels in lasers, spectrophotometers and other lab equipment. 200W cooling capacity. Very small footprint to conserve bench space. Features: built-in compressor, proportional integrated differential PID control that compensates for variable heat load and set-point drift, platinum resistance temperature sensor, pre-set and variable temperature control with digital readout for temp and set-point, and overtemp/low liquid cut-offs. Temperature Range: -20 to +120 deg C, Reservoir Cap: 6L, Top Opening: 6" X 5", Over-all dimensions: 15-7/8"L x 7-7/8"W x 21-7/8"H. SS Cover included. Power req: 115v, 50/60hZ, 1400W. Excellent used condition fully checked from -19.2C to +106C, cleaned, guaranteed. Includes manual. Price: $1195.00

Brinkmann/Lauda RE106 Refrigerated Circulating Bath. (Inv #8815) Designed for immersion use or for external circulation to maintain temperature levels in lasers, spectrophotometers and other lab equipment. 200W cooling capacity. Very small footprint to conserve bench space. Features: built-in compressor, proportional integrated differential PID control that compensates for variable heat load and set-point drift, platinum resistance temperature sensor, pre-set and variable temperature control with digital readout for temp and set-point, and overtemp/low liquid cut-offs. Temperature Range: -20 to +120 deg C, Reservoir Cap: 6L, Top Opening: 6" X 5", Over-all dimensions: 15-7/8"L x 7-7/8"W x 21-7/8"H. SS Cover included. Power req: 115v, 50/60hZ, 1400W. Excellent used condition fully checked from -19.2C to +106C, cleaned, guaranteed. Includes manual. Price: $1195.00

Brinkmann/Lauda RE106 Refrigerated Circulating Bath. (Inv #8816) Designed for immersion use or for external circulation to maintain temperature levels in lasers, spectrophotometers and other lab equipment. 200W cooling capacity. Very small footprint to conserve bench space. Features: built-in compressor, proportional integrated differential PID control that compensates for variable heat load and set-point drift, platinum resistance temperature sensor, pre-set and variable temperature control with digital readout for temp and set-point, and overtemp/low liquid cut-offs. Temperature Range: -20 to +120 deg C, Reservoir Cap: 6L, Top Opening: 6" X 5", Over-all dimensions: 15-7/8"L x 7-7/8"W x 21-7/8"H. SS Cover included. Power req: 115v, 50/60hZ, 1400W. Excellent used condition fully checked from -19.2C to +106C, cleaned, guaranteed. Includes manual. Price: $1195.00

Buchi RII Rotovapor, Rotary Evaporator. (Inv #8840) RII rotary evaporator with all 24/40 plasti-coated vertical condenser, support rod and clamp. Plain glass 1000ml receiving flask, 1000ml recovery flask, and 250ml Ace Glass 6704-16 Anti-splash trap. Rotation 20-280 rpm. Quick-release bath 20-95°C. Includes new Keck clips for glassware connections, new duct vacuum gasket, new #35 receiving flask clamp. Power req.: Rotovap, 100-240°C, 50/60z, 60W; Bath, 100-120V, 50/60Hz, 1700W. Excellent used condition, fully checked, cleaned, guaranteed. Includes Manual. Price: $1775.00

Substitute the Buchi Cold Trap Condenser Assembly C P+G. Plastic Coated for safety. Price: $1775.00

Burrell Model 75 Wrist Action Shaker. (Inv #8842) Provides gentle to violent shaking action for up to 12 volumetric flasks of any size, bottles up to 118ml capacity; Erlenmeyer short-neck flasks, flat- or round-bottom flasks up to 200ml capacity; or test tubes up to 55mm (2-3/16") diameter. Timer can be set up to 55 minutes or set for continuous operation. The degree of agitation is controlled by an adjustment knob with 0 to 10 setting range. Loads do not need to be balanced or equalized. Includes six double finger-grip clamps. There is some minor surface rust on the case and connecting collars. Good used condition, checked, guaranteed. Price: $795.00

Cole-Parmer Model 4810 Aluminum Top Magnetic Stirrer. (Inv #8277) General lab use applications include mixing reagents, dissolving salts, stirring bacteriological cultures. Dim: 6" x 6" aluminum top. Stir speed: 50-1650rpm. Power req: 120V, 60Hz, 0.4A, 58W. Good used condition, top has some staining, checked, guaranteed. Price: $85.00

Cole-Parmer Roto-Torque Variable Speed Rotator. (Inv #7920) The Roto-Torque provides the gentle rotating motion to efficiently mix the contents of your test tubes, flasks and bottles. Can be locked at the desired angle with the included adjustable tilt stand. Shakers have a speed range from 3 to 80 rpm. Rotator has a bottle attachment which will accept a bottle of max. dia of 6", and 8.5" in height. Power req. 115V, 50/60Hz, 46W. Excellent used condition, fully checked, cleaned, guaranteed. Price: $255.00

Cole-Parmer Roto-Torque Variable Speed Rotator. (Inv #7921) The Roto-Torque provides the gentle rotating motion to efficiently mix the contents of your test tubes, flasks and bottles. Can be locked at the desired angle with the included adjustable tilt stand. Shakers have a speed range from 3 to 80 rpm. Rotator has a bottle attachment which will accept a bottle of max. dia. of 6", and 8.5" in height. Power req. 115V, 50/60Hz, 46W. Very good used condition, fully checked, cleaned, guaranteed. Price: $225.00

Cole-Parmer® Roto-Torque® Variable Speed Rotator w 60 x 17mm Test Tube Basket. (Inv #8079) Gentle rotating motion efficiently mixes the contents of your test tubes. Can be locked at the desired angle with the adjustable tilt stand. Shakers have a speed range from 3 to 80 rpm. Power req.: 115V, 50/60Hz, 0.4A. Very good used condition, fully checked, cleaned, guaranteed. price: $225.00

Corning PC-100 Hot Plate. (Inv #8501) Reliable workhorse! Famous Corning "Pyroceram" top and base are in very good condition. Heating Range: to 510 deg C, Heating Surface: 100 sq. in., Overall Dimensions: 10" X 10" X 5" high. Power req. 120V, 50/60Hz, 1320W. Very good used condition (slight staining on top), fully checked, cleaned, guaranteed. Price: $125.00

Corning PC-161 Magnetic Laboratory Stirrer. (Inv #8309) Compact stirrer with a 4" x 4" Pyroceram top. Stir range, 150 to 1300 rpm. Weight: 5 lbs. Power req.: 120 V, 50/60 Hz, 20 W. Very good used condition (the top is excellent, the case shows minor nicks), fully checked, cleaned, guaranteed. Price: $85.00

Corning PC-210 Magnetic Stirrer. (Inv #7865) Microprocessor design provides linear control for stirring to ensure consistent performance. The software senses the requirements of your application and provides the power required to assure optimal performance. 4" X 5" "Pyroceram" top. Stir range, 60 to 1200 rpm. Weight: 5 lbs. Power req.: 120 V, 50/60 Hz, 388 W. Good used condition (the top is excellent, the case shows minor corrosion), fully checked, cleaned, guaranteed. Price: $95.00

Corning PC-35 Hot Plate. (Inv #8541) Reliable workhorse! Famous Corning "Pyroceram" top and base are in excellent condition. Heating Range: to 510 deg C, Heating Surface: 49 sq. in., Overall Dimensions: 7" X 7" X 5" high. Excellent used condition, top is spotless, fully checked, cleaned, guaranteed. Price: $115.00

Eberbach #2500 Clinical Rotator. (Inv #8385) Clinical rotator has a 13 x 13in square platform with new rubber pad. 100-220 rpm in a 0.75in diameter circle. Continuous operation, or timed 1 to 30 minutes. Power req. 115VAC 60Hz. Good used condition with minor scuffs and scratches, fully checked, cleaned, guaranteed. Price: $ 350.00

Elmeco Model MM-50 "Micro Mixer". (Inv #5168) Made for rapid mixing of small vessels (0.25 to 6 ml) that can be held in or against the "Delrin" 19mm diameter mixing cup. The Delrin cup is removable for autoclaving. Variable speed range is 2000 to 3000 rpm. Current model from Elmeco- list price $215.00. Very good used condition, checked, guaranteed. Price: $85.00

Eppendorf Thermomixer, 1.5ml Tube Block. (Inv # 8837) Provides heating and shaking of 24 x 1.5ml microcentrifuge tubes. Mixing speed 300 to 1400rpm, with a 3mm stroke. Temperature range ambient +4 to 99°C, adjustable in 1°C increments. Accuracy, ±1°C @ 20 to 45°C, ±2°C @ 45 to 99°C. Heating rate ~ 5°C/min. Dim: (WxDxH) 6.5 x 9.5 x 5.5 in. Power req: 100-240V, 50/60Hz. 90W. Very good used condition, fully checked, cleaned, guaranteed. Price: $985.00

Fisher Scientific Ceramic Top Hotplate - 144 sq. in. (Inv #8469) Acid and alkali resistant 12 x 12 in square ceramic top, with a cast aluminum base, make this a rugged hotplate. Extremely flat surface for maximum heat transfer. Temp range, 120 to 370°C. Power req.: 120V, 60Hz, 1560W. Very good used condition, fully checked, cleaned, guaranteed. Price: $160.00

Fisher Scientific Ceramic Top Hotplate. (Inv #8612) 108 sq. in. (10 x 10) ceramic top hotplate with enameled cast aluminum base. Temperature, 120-390°C. Power req. 120V, 60Hz, 10.1A. Very good used condition (excellent top), fully checked, cleaned, guaranteed. Price: $125.00

Fisher Scientific Clinical Rotator. (Inv #8415) Large durable textured rubber platform is 13" x 13", and accommodates up to a 10 lb workload. Overall dimensions, 13L x 13W x 7"H. Timed operation 1 to 25 minutes, or continuous run, Speed 60 to 210 oscillations/min. runs real smooth attesting to its solid build.. End of cycle audible alarm. Meets method requirements for VDRL, APHA, Kline, Mazzini, sero-flocculation, and agglutination tests. Power req. 115V, 50/60Hz, 3A, 350W. Very good used condition, fully checked, cleaned, guaranteed. Price: $595.00

Fisher Model 125D "Isotemp" Digital Dry Bath Incubator. (Inv #8304) Versatile 2-block dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and digital thermostat for easy temperature control. Temperature Range: ambient +5 °C to 125.0 °C, ±0.4° uniformity at 37°C; stability, ±0.2°C. Includes 2 blocks with twenty-four 1.5ml microcentrifuge tube holes. Power req.: 120V, 50/60Hz, 230W. Very good used condition, fully tested, cleaned, guaranteed. Price: $325.00

Fisher Isotemp 126D Digital Dry Bath Incubator 2-Block. (Inv #8246) Versatile 2-block dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and digital PID thermostat for easy temperature control. Temperature Range: ambient to 130 °C. Dim 14-7/16L x 8-11/16W x 3-5/16 in.H; Does not include any blocks. Power req.: 240V 50/60Hz, 0.63A, 150w with European style plug for Scandinavia, Deu., Ned. Like new condition, fully checked, cleaned, guaranteed. Price: $200.00

Fisher Isotemp 126D Digital Dry Bath Incubator 2-Block. (Inv #8247) Versatile 2-block dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and digital PID thermostat for easy temperature control. Temperature Range: ambient to 130 °C. Dim 14-7/16L x 8-11/16W x 3-5/16 in.H; Does not include any blocks. Power req.: 240V 50/60Hz, 0.63A, 150W with European style plug for Scandinavia, Deu., Aus. Like new condition, fully checked, cleaned, guaranteed. Price: $200.00

Fisher Model 145 "Isotemp" Dry Bath Incubator, 3-block. (Inv #8116) Versatile dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and dual thermostats for easy temperature control. Temperature Range: ambient to 130 °C. Includes 3 blocks, with 24 x 10mm holes in each. power req.: 115V, 50/60Hz, 275W. Very good used condition, fully tested, cleaned, guaranteed. Price: $335.00

Fisher Model 145 "Isotemp" Dry Bath Incubator, 3-block. (Inv #8291) Versatile dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and dual thermostats for easy temperature control. Temperature Range: ambient to 130 °C. Includes 3 blocks, with 20 x 10mm holes in each. power req.: 115V, 50/60Hz, 275W. Very good used condition, fully tested, cleaned, guaranteed. Price: $335.00

Fisher Model 145 "Isotemp" Dry Bath Incubator, 3 Microcentrifuge Tube Blocks. (Inv #8714) Versatile dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and dual thermostats for easy temperature control. Temperature Range: ambient to 130 °C. Dual range thermostat for more precise temperature control. Includes 3ea. 1.5ml microcentrifuge tube blocks, with 24 x 11mm tapered holes in each, and block removal tool. Power req.: 115V, 50/60Hz, 275W. Excellent used condition, fully tested, cleaned, guaranteed. Price: $335.00

Fisher Model 145 "Isotemp" Dry Bath Incubator, 6-block. (Inv #8751) Versatile dry bath provides controlled dry heat for a wide variety of clinical, and general chemistry applications. Features steel construction and dual range thermostats for easy temperature control. Temperature Range: ambient to 130 °C. Includes 6 blocks, with 20 x 13mm holes in each. Power req.: 115V, 50/60Hz, 540W. Very good used condition, fully checked, cleaned, guaranteed. Price: $450.00

Fisher Model 145 "Isotemp" Dry Bath Incubator. (Inv #8290) Versatile 1-block dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and dual thermostats for easy temperature control. Temperature Range: ambient to 130 °C. Includes 1 block with 9 x 16mm holes. Power req.: 115V, 50/60Hz, 100W. Very good used condition, fully tested, cleaned, guaranteed. Price: $149.00

Fisher Scientific 2LS-M Isotemp Shallow-Form Digital Water Bath (Inv #8426) Shallow form for microbiological applications. 1/2 gallon capacity. Temperature range from ambient to 100°C. Specs: PID control provides ±0.2°C uniformity, ±0.5°C accuracy, and ±0.5°C stability at 37°C setpoint. Resolution ±0.1°C digital display is user selectable for °C or °F and is large enough to read from across the room. Dual thermostats; temperature set, and over-temp protection. Includes acrylic gable cover for temperatures 60-100°C. Heating elements will not burn out if bath accidentally runs dry! Reservoir dim: 5-7/8 x 11-3/4 x 1-3/4" deep. Power req.: 120V, 60Hz, 120W. Very good used condition, some minor surface pitting in bath, fully checked, cleaned, guaranteed. Price: $185.00

Fisher Scientific 2053FS Isotemp Dry Bath Incubator, 3-Block. (Inv #8129) Versatile dry bath provides controlled dry heat for a wide variety of clinical and general chemistry applications. Features steel construction and dual thermostats for easy temperature control. Temperature Range: ambient to 130 deg C. Includes 3 blocks, each with with twenty 13mm holes. Very good used condition, fully checked, cleaned, guaranteed. Price: $335.00

Fisher MV1 Minishaker, by IKA Works. (Inv # 8629) Low vibration, quiet operation, low form vortexer can be operated one-handed. Just press down with your tube to begin vortexing. Includes cup head for vortexing test tubes and centrifuge tubes. Variable speed can be set from 200-2500rpm. 4.5mm orbit. Dim.: WxDxH; 4.5 X 8.75 X 2.3 in. Very good used condition, fully checked. cleaned, guaranteed. Price: $110.00

Glas-Col Microplate Multi-Pulse Vortexer. (Inv #7966) The Multi-Pulse Vortexer is designed to vortex the contents of multiple tubes and well as individual tubes, flasks, bottles, microplates, etc. Adjustable speed of the vortexer drive plate from 0 to 2000 rpm. also has a momentary power for quick vortexing. Pulse feature turns motor off briefly, and then back on. Pulse rate varies from 60 to 80 pulses per minute. Dim.: WxDxH; 18 x 8 x 9". Power req.:120V 50/60Hz, 300W. Very good used condition, fully checked, cleaned, guaranteed. Price: $725.00

Glas-Col Model M-104 Hemispherical Mantle for 250-300ml Flask. (Inv #7386, 7387, 7388) is the most compact mantle with an aluminum shell that can heat a 300ml flask. This mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing and includes support ring M534. Power req. 115V, 180W. Mantles must be operated through a power control. (Click here for variable transformer controllers) New-in-Box.. Price: $115.00

Glas-Col Model M-104T Hemispherical Mantle for 250-300ml Flask with Thermocouple. (Inv #7384, 7391) is the most compact mantle with an aluminum shell that can heat a 300ml flask. This mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Includes an Fe-constantin thermocouple lead for monitoring mantle temperature with external thermometer. Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing and includes support ring M534. Power req. 115V, 180W. Mantles must be operated through a power control. (Click here for variable transformer controllers) Very good used condition, checked, guaranteed. Price: $94.00

Glas-Col Model TM-104 Mantle for 250-300ml Flask. (Inv #7380) The TM104 is a free-standing mantle with an aluminum shell that can heat a 250-300ml flask. This mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the flask is covered so the contents being heated are fully visible. The mantle is grounded through the aluminum housing. Clamp on rear for optional mounting onto a support rod. Power req. 115V, 180W. Mantles must be operated through a power control. (Click here for variable transformer controllers) Very good used condition, checked, guaranteed. Price: $99.00

Glas-Col Model 099A Benchtop Shaker w/ 6ea. Large 3-prong Clamps, and 1ea. TR800 Test Tube Rack Holder. (Inv #8849) The Glas-col 099A mimics hand shaking for repeatable results. reciprocating shaking from a gentle ~10 per minute to a vigorous 125 rpm, no need to wear out your wrist.Load capacity: 10lb. Dim w/o clamps, etc. (LxWxH): 13"w x 10"d x 11 3/4"h. Power req.: 115V, 50/60Hz. Very good used condition, fully checked, cleaned, guaranteed. Price $810.00

Go to page [1] [2] [3]

Note: Mailing address and store address are listed on the [HOMEPAGE]