BD Clay Adams MHCT II Microhematocrit
Centrifuge. (Inv #7794) BD
420556.
Includes the 24 x 75mm tube rotor, cover, and wrench. The MHCT
II has a safety interlock which prevents the lid from being opened
during operation. 1-15min timer.
Specs:
Fixed speed of 11,700 rpm, 13,700g RCF.
Dim. WxHxD, 8-7/8 x 10-1/8 x 12-5/8
Very good used condition, fully checked, cleaned, guaranteed.
Price: $845.00
Beckman Instruments Model "Microfuge
12" Microcentrifuge. (Inv #7670)
Microcentrifuge
offers variable speed to 12,000 rpm and has a front-panel timer
from 0 to 15 minutes. Includes horizontal rotor: 12 place X 1.5/2.0ml.
Power req. 120V, 60Hz, 4A. Very good used condition, fully checked,
cleaned, guaranteed. Price: $425.00. Also available is
a six place rotor with cover. This rotor may be substituted for
the12 place rotor. See additional photos by clicking on thumbnail
at right.
Clay Adams Compact II Centrifuge
Capacity. (Inv #7646M) The Compact II
Centrifuge
is designed specifically for use in physicians offices and clinical
laboratories, it performs separation procedures for blood, fecal
and high-density sedimentation. The Compact II also performs very
well in biological, chemical, and industrial laboratories where
fast separation of materials of different densities is desirable
e.g. BS&W and oil/water separations. It has a locking shatter
resistant lexan cover, 30 minute timer with "hold" for
continuous operation, Aluminum base, and 3-suction cup feet for
stability. Speed: 3200rpm/1163xG, Capacity: 6 X 15ml tubes in
a fixed-angle rotor. Dim (DxWxH): 11" x10" x 10".
Power 120V, 60Hz, 85W. Come with tube shields and bumpers. Refurbished.
Price: $250.00, 10 for $225.00 each, please call
us for larger quantities.
Clay-Adams Model 420101 Dynac
Centrifuge with 24-Place 3ml Fixed-Angle
Rotor.
(Inv #7370) Compact design allows operation almost anywhere.
For low-temperature centrifugation, place the entire centrifuge
in a refrigerator or cold room. The Dynac features adjustable
speed control, a 30-minute timer with hold for continuous operation,
and electronic braking. Maximum speed to 3300rpm/1580xG, depending
on load. Heavy guage aluminum guard bowl, and clear lexan lid.
Power req. 120V, 50/60Hz. Excellent used condition, fully checked
and guaranteed. Price: $1395.00
Drucker Model 613B Centrifuge,
refurbished. Great Deal!! Small 11" high bench-top centrifuge
takes up only
9-1/2" diameter of bench space! Specifications: Nominal Speed:
3100 rpm with six 10ml tubes, Nominal RCF: 1240 X G, Max. Volume:
90ml (6 X 10ml), Operating Power: 115V, 60Hz, 120W. Refurbished.
Comes with tubes and bumpers. Price: $99.95, 10 for $90.00
each, please call us for larger quantities.
Dupont Sorvall Model GLC-2B General-Purpose
Tabletop Centrifuge w/ HL4
Rotor
and Carriers. (Inv #7753) The GLC-2B utilizes the "exclusive
SORVALL Gyro-Action self balancing drive- the smoothest most trouble-free
drive system available in a general laboratory centrifuge"
and a powerful 1/3 hp (8 amp) motor for fast acceleration and
braking. Centrifuge: Max. speed (unloaded, no rotor)- 6000 rpm,
Max. Force: 4960 X G, Maxi Capacity: 4 X 150ml. The HL4 rotor
is set up for 20- 15ml tubes and 24- 10mm diameter tubes, all
are matched serialized carriers. Top speed with this set-up is
2850 rpm. Power req. 115V, 50/60Hz, 8A. Very good used condition,
fully checked, cleaned, guaranteed. Price: $795.00
Eppendorf Model 5413 Microcentrifuge.
(Inv #7559) Table-top
microcentrifuge
iwithand micro-processor control to ensure accuracy and reproducibility.
The included 12-place rotor accepts 1.5 to 2.0 mL tubes. Fixed
speed of 11,500 rpm. Power req. 115V, 50/60Hz, 150W. Very good
used condition, fully checked, cleaned, guaranteed. Price: $325.00
Eppendorf
Model 5414 Microcentrifuge. (Inv
#7573) Table-top microcentrifuge with
micro-processor control to ensure accuracy and
reproducibility. The included 12-place rotor accepts 1.5 mL tubes.
Fixed speed @ 15,000 rpm (15,600G), with a built-in timer that
can be set for 1 to 30 minute runs. There is also a momentary-contact
switch (15,000 rpm) for short runs under 60 seconds. Power req.
120V, 50/60Hz, 230W. Very good used condition, fully checked,
cleaned, guaranteed. Price: $275.00
Eppendorf Model 5415C Microcentrifuge.
(Inv #7907) Table-top microcentrifuge
includes
a covered rotor for quiet operation and micro-processor control
to ensure accuracy and reproducibility. The included 18-place
rotor accepts 1.5 to 2.0 mL tubes. Variable speed control allows
speeds up to 14,000 rpm (16,000G), and the built-in timer can
be set from 1 to 30 minute runs. There is also a momentary-contact
switch for short runs under 60 seconds, LED will flash once/sec
for timing your short run. Power req. 115V, 50/60Hz, 250W. Excellent
used condition, fully checked, cleaned, guaranteed. Price: $695.00
Hamilton Bell Model V6500 "VanGuard"
Centrifuge. (Inv #7645M) The
VanGuard
V6500 Centrifuge is designed specifically for use in physicians
offices and clinical laboratories, it performs separation procedures
for blood, fecal and high-density sedimentation. The VanGuard
also performs very well in biological, chemical, and industrial
laboratories where fast separation of materials of different densities
is desirable e.g. BS&W and oil/water separations. It has a
locking cover, 60 minute timer with "hold" for continuous
operation, and 4-suction cup feet for stability. Speed: 3400 rpm,
Capacity: 6 X 15ml tubes in a fixed-angle rotor. Dim (DxWxH):
11" x 9.5" x 9". Power 110V, 60Hz, 100W. Come with
tube shields and bumpers. Refurbished. Price: $185.00,
10 for $169.00 each, please call us for larger quantities.
IEC #2498 MicroMax Microcentrifuge,
24 x 1.5ml Covered Rotor. (Inv #7743)
Microprocessor
controlled centrifuge with digital display of speed and run-time.
Speed may be set from 1000-13,200rpm in 100rpm increments.
Run-time options:
0-1 minute in 1 second increments
1-5 minutes in 15 second increments
5-99 minutes in 1 minute increments
Centrifuge also features a momentary spin, and indefinite hold
spin options. Variable ramp and stop rate functions allow for
a 7 sec. to max speed, and stop in 9 seconds for fast through
put, or choose between any combination of fast/slow start, and
fast/slow stop. For repeat runs just push the start, and the settings
of the previous run wil be repeated. Dim (LxWxH): 12 x 17 x 9
in. Power req: 115V, 50/60Hz, 750W. Very good used condition (a
few nicks in the paint), fully checked, cleaned, guaranteed. Price:
$695.00
IEC Micro-MB Microcentrifuge
w/ Microhematocrit Rotor #275. (Inv #7833)
High
speed centrifuge reaches maximum speed of 11,500rpm/13,460xG in
just 10sec. Manual brake can stop it in 5 sec. These controls
allow for a high through-put of samples. 15-minute timer with
30 second resolution. Dim. LxWxH, 10 x 11 x 9in. Power req. 120V,
60 Hz, 180W. Very good used condition, fully checked, cleaned,
guaranteed. Price: $650.00
Tomy Seiko HF-120 Personal
Microcentrifuge 6 x 2.0ml Rotor. (Inv
#7924)
Tiny footprint centrifuge will spin 6 x 2.0ml microcentrifuge
tubes. Tested to 4600rpm under full load. Power req. 120V. 60Hz.
Very good used condition, fully checked, cleaned, guaranteed.
Price: $120.00
Unico FX Power Spin Centrifuge.
(Inv #7654M) The Unico FX Centrifuge is
designed
specifically for use in physicians offices and clinical laboratories,
it performs separation procedures for blood, fecal and high-density
sedimentation. The FX also performs well in biological, chemical,
and industrial laboratories where fast separation of materials
of different densities is desirable e.g. BS&W and oil/water
separations. It has a locking cover which interrupts power to
the centrifuge if opened, a 30 minute timer, and 4-suction cup
feet for stability. Quiet running, 58 decibels at speed. Speed:
3400 rpm, NOTE: Capacity: 6 x 2ml to 10ml, or 3 x 15ml
centrifuge tubes, in a fixed-angle rotor. Dim (DxWxH): 12"
x 10" x 8". Power 115V, 60Hz, 180W. Come with tube shields
and bumpers. Refurbished. Available while supplies last. Price:
$115.00 each, 10 for $95.00 each, please call us for larger
quantities.
Note: Mailing address and store address are listed on the [HOMEPAGE]