[ORDERFORM] [HOMEPAGE]![]()
Click here for Electrophoresis
Power Supplies
Amersham UVC500 Ultraviolet Crosslinker.
(Inv #8617) Built by Hoeer Inc for
Amersham/GE
Lifesciences, the UVC500 provides a uniform intense UVC light
for DNA crosslinking, nicking, rapid site mapping, RecA function
testing, UV sterilization, and eliminating PCR contamination.
UVC (shortwave UV) detector to ensure precise energy dosing of
samples. Settings for either timed run, or dose run. Top opening
door with a UV filter for viewing of crosslinker contents. Power
req.: 115V, 60Hz, 80W. Very good used condition, fully checked,
cleaned, guaranteed. With Manual. Price: $639.00
BioRad 165-1777 GelAir Gel Drying
Oven. (Inv #8622) For preserving agarose and
polyacrylamide
gels. The GelAir drying oven will completely dry mini gels in
45 min to crystal clear with a glossy finish. Power req.: 115V.
60Hz, 6A, 700W. Dim.(WxDxH): 11 x 17 x 12 in. Very good used condition,
fully checked, cleaned, guaranteed. Price: $439.00
Bio-Rad Model 165-1801 Protean
II xi Cell. (Inv #8646) Large format vertical slab gel
electrophoresis
cell runs 16cm, or 20cm gels. Included are: tank, lid, core, gaskets,
chamber, 16cm clamps with casting stand, 2ea. 3-mm 10-well combs,
4ea. 3mm spacers, 2 ea. 1.5mm 10-well combs, 1ea. 1.5mm IPC comb,
and level bubble. Ready to run slab gels, just add 16cm glass
plates, consumables, and Power Pac 1000 or equivalent power supply,
and you are ready to run.
Other combs, spacers, and 20cm clamps available from Bio-Rad,
along with tube gel snap-in insert. Power req.: Power Pac 1000
or equivalent electrophoresis power supply. Very good used condition,
fully checked, cleaned, guaranteed. Includes manual. Price: $549.00
BioRad 170-3940 TransBlot SD Cell. (Inv #8602) Fast, efficient, economical blotting using a minimum of consumables. You get more done, in less time, for less money! No need for a buffer tank full of buffer, or gel cassettes. Horizontal configuration, using Pt-Ti anode, and SS cathode plates. Uses about 200ml buffer per transfer. transfer time 15-30 min for minigels, 30-60 min for full size gels, maximum size - 20 x 18.5cm. Gel stacking is possible using dialysis membrane between each gel sandwich. The SD cell does Western blotting, and can be used to transfer DNA/RNA, by using the Agarose Semi-Dry Blotting Support Frame (included when ordering consumable) . Just add the consumables and your EP Power Supply and you are up and running. Dim.: 37 x 24 x 11 cm. Power req.: 25VDC, 50W Maximum. Very good used condition, fully checked, cleaned, guaranteed. Price: $375.00
BioRad Model 785 Vacuum Blotter.
(Inv #8070) The Model 785 vacuum blotter is used to
transfer
DNA or RNA from an agarose gel onto a nylon membrane. The blotter
produces even transfers from top to bottom and side to side, regardless
of the gel size. Easy to assemble with a simple snap-on sealing
frame, just press in place to form the vacuum seal. The 785 can
accommodate gels as large as 20 x 25 cm. The vacuum blotter is
made of a durable molded plastic that is resistant to the chemicals
commonly used in transfers, such as 0.25 N HCl and 0.5 N NaOH.
Just add new gaskets: available from BioRad, and a vacuum source
0-20 in H20, and you are ready to go. Very good used condition,
fully checked, cleaned, guaranteed. Price: $295.00
Add the:
LKB Bromma Model 2016 Vacu-Gene
Vacuum Blotting Pump. (Inv #7061)
Compact vacuum
pump designed to be used with the Vacugene Vacuum Blotting System,
it can be used anywhere a light vacuum is desired. Specs: Vacuum:
variable 0-100 cm. H2O. Pwr: 98-255V adjustable, 50/60Hz, 40W.
Very good used condition with some scratches in the paint, checked,
guaranteed. Price: $285.00 Price
for both: $522.00- Save 10%
Fisher Biotech FB-UVXL-1000 Microprocessor
Controlled UV Crosslinker mfg. by
Spectronics.
(Inv #8253) Used to crosslink
DNA or RNA to nylon, nitrocellulose, or nylon-nitrocellulose membranes.
1 to30-second process, binds nucleic acids to these membranes.
Internal photo sensor accurately measures only the desired 254nm
wavelength, not the full spectrum of emitted light. Can be operated
in autocrosslink, time, energy, or intensity modes. Includes 5
X 15W 254nm bulbs. Internal dim. (WxDxH) 34cm X 19cm X 18cm. Power
req. 115V, 60Hz, 2A. Very good used condition, fully checked,
cleaned, guaranteed. Price: $595.00
Fotodyne 3-3700 Variable White
Light Illuminator. (Inv #8107) Designed for
applications
requiring uniform visible light illumination such as viewing or
photographing protein gels, autoradiograms and microtiter plates.The
21 x 26 cm flashed opal glass surface, combined with variable
intensity control, provides superior lighting for different control
requirements. The variable intensity control allows you to adjust
the brightness from ~30%-100% of the maximum setting. This provides
the ability to control lighting for optimal viewing or documentation
of stained samples. Power req.: 110V, 60Hz, 100W. Very good used
condition. fully checked, cleaned, guaranteed. Price: $195.00
Hoefer Scientific GE200-115V
Gel Eluter w/SixPac. (Inv #8419) Complete with
clean
caps and spotless electrodes. Power req.:115V, 60Hz. Very good
used condition, fully checked, cleaned, guaranteed. Price: $295.00
Hoefer Scientific Model #PR 150
Deca-Probe Incubation Manifold. (Inv #7305) The Mini
Deca-Probe
may be used in either of two basic ways. A single sample of protein
or nucleic acid, fractionated on a slab gel and then transferred
to a membrane, may be assayed with up to ten different antisera
or other reagents. The Mini Deca-Probe thus offers a time-saving
alternative to sequential probing, while avoiding the need for
derivatized paper. Alternatively, ten different samples may be
fractionated, transferred, and then assayed with one or more parallel
assay systems. Easy introduction and removal of reagents minimizes
the risk of cross-reactivity and facilitates multiprobing of up
to 10 different antigens on a single membrane. Requires only enough
reagents to wet the membrane and mix -- about 0.5 to 2.0 ml. The
Deca-Probe uses 8.8 x 8.8 cm membranes and lanes are 8.0 cm long.
Very good used condition, checked, guaranteed. Price: $175.00
Invitrogen Life Technologies
G5300-01 E-Gel Opener. (Inv #8576) Use to
safely
and quickly open E-Gel cassettes. Recessed blades for maximum
safety. Made of anodized aluminum. Large knob for ease of use
while wearing gloves. Excellent used condition, fully checked,
cleaned, guaranteed. Price: $125.00
Kodak 13260 Chamber Plate Set
- Replacement Plates. (Inv #8573) 2 identical
glass plates with bumps bevels, and grooves. Place 20 x 20cm TLC
sheet between plates, clamp, and place in reservoir. Excellent
used condition. Price: $69.00
Lab-Line 1580 Rotary Autoplater.
(Inv #8255) For spiral plating of 100x15mm petri
dishes.
Speed 110 ±10 rpm. Power req.: 120V, 60Hz. 7W. Good used
condition, fully checked, cleaned, guaranteed. Price: $69.00
Life Technologies
S-2 Sequencing Gel Electrophoresis Apparatus. (Inv #8763) Designed
for vertical polyacrylamide gel separations of
oligo- and polynucleotices, nucleic acid sequencing, genotyping
and polymorphic studies. Produces a 30 x 40 cm gel. Aluminum
backplate for even heat dissipation. Lower buffer tray with integral
reservoir for draining of upper buffer chamber. Includes S-2 unit,
lower buffer tray with electrode, and cables. Requires standard
consumables: combs (14cm long) Set of vinyl side
spacers Pair of glass plates Gel sealing tape.Very
good used condition, checked, cleaned, guaranteed. Includes manual.
Price: $395.00
Life Technologies
S-2 Sequencing Gel Electrophoresis Apparatus. (Inv #8764) Designed
for vertical polyacrylamide gel separations of
oligo- and polynucleotices, nucleic acid sequencing, genotyping
and polymorphic studies. Produces a 30 x 40 cm gel. Aluminum
backplate for even heat dissipation. Lower buffer tray with integral
reservoir for draining of upper buffer chamber. Includes S-2 unit,
lower buffer tray with electrode, and cables. Requires standard
consumables: combs (14cm long) Set of vinyl side
spacers Pair of glass plates Gel sealing tape.Very
good used condition, checked, cleaned, guaranteed. Includes manual.
Price: $395.00
Life Technologies
S-2 Sequencing Gel Electrophoresis Apparatus. (Inv #8765) Designed
for vertical polyacrylamide gel separations of
oligo- and polynucleotices, nucleic acid sequencing, genotyping
and polymorphic studies. Produces a 30 x 40 cm gel. Aluminum
backplate for even heat dissipation. Lower buffer tray with integral
reservoir for draining of upper buffer chamber. Includes S-2 unit,
lower buffer tray with electrode, and cables. Requires standard
consumables: combs (14cm long) Set of vinyl side
spacers Pair of glass plates Gel sealing tape.Very
good used condition, checked, cleaned, guaranteed. Includes manual.
Price: $395.00
Life Technologies
XCell II Mini-Cell and XCell II Blot Module Kit. (Inv
#8452) Simple sturdy construction, makes the
XCell Kit easy to use. With the Min-Cell two 8 x 8cm gels can
be run. The XCell II blot module allows protein, nucleic acid
transfer from mini-gels to membranes, with a maximum size of 9
x 9cm. Just substitute the XCell blot module in the XCell mini-cell
for the gel/buffer core. Easily performs western, Southern,
and northern transfers, requiring <200ml buffer. Platinized
electrode plates for a uniform electric field. Matching gel wedge
system eliminates complicated clamps, hinges. Included are the
XCell buffer chamber. chamber lid with electrodes, gel/buffer
core, blot module, matching gel tension wedges, and spacer plate.
Just add consumables, your sample, power supply, and you are ready
to run. Very good used condition, fully checked, cleaned, guaranteed.
Price: $229.00
Life Technologies
XCell II Mini-Cell and XCell II Blot Module Kit. (Inv
#8453) Simple sturdy construction, makes the
XCell Kit easy to use. With the Min-Cell two 8 x 8cm gels can
be run. The XCell II blot module allows protein, nucleic acid
transfer from mini-gels to membranes, with a maximum size of 9
x 9cm. Just substitute the XCell blot module in the XCell mini-cell
for the gel/buffer core. Easily performs western, Southern,
and northern transfers, requiring <200ml buffer. Platinized
electrode plates for a uniform electric field. Matching gel wedge
system eliminates complicated clamps, hinges. Included are the
XCell buffer chamber. chamber lid with electrodes, gel/buffer
core, blot module, matching gel tension wedges, and spacer plate.
Just add consumables, your sample, power supply, and you are ready
to run. Very good used condition, fully checked, cleaned, guaranteed.
Price: $229.00
Life Technologies
XCell SureLock Mini-Cell and XCell II Blot Module Kit.
(Inv #8456) Simple sturdy construction, makes
the XCell Kit easy to use. With the Min-Cell two 8 x 8cm gels
can be run. The XCell II blot module allows protein, nucleic acid
transfer from mini-gels to membranes, with a maximum size of 9
x 9cm. Just substitute the XCell blot module in the XCell mini-cell
for the gel/buffer core. Easily performs western, Southern,
and northern transfers, requiring <200ml buffer. Platinized
electrode plates for a uniform electric field. Sure-Lock system
eliminates complicated clamps, hinges. Included are the XCell
buffer chamber. chamber lid with electrodes, gel/buffer core,
blot module, sure-lock gel tension wedge, and spacer plate. Just
add consumables, your sample, power supply, and you are ready
to run. Very good used condition, fully checked, cleaned, guaranteed.
Price: $249.00
LKB 2005
Transphor Electrophoresis Transfer Unit Mfg. by Hoefer
Scientific for LKB Produkter. (Inv
#7666) Same unit as the Hoefer TE 42 Protein Transfer Tank, with
the 2005 Transphor Power Supply. The power supply mounts on top
of the Transphor Transfer Electrophoresis Unit.
Capacity: Transfer four gels of 15 x 21 cm or sixteen 7 x 10 cm
mini-gels. Load cassettes easily with even contact between the
gel and transfer membrane. The safe, sturdy electrode panels lock
automatically in place. Efficient transfer due to evenly spaced
vertical platinum wire on electrode panel.
The grid design of the gel cassettes maximizes the open area for
even transfers of gels up to 15 × 21 cm. The crucial element
for uniform electrophoretic transfer, a uniform electrical field,
is assured by spacing the electrode panels 10 cm apart and incorporating
140 cm of platinum wire in an evenly-spaced pattern.
This unit includes the optional cooling core to help maintain
stable temperature during blotting. The incorporated power supply
allows for a very small footprint, WxDxH, 12" x 6" x
13". This item comes with the following: 2-electrode panels,
2 gel cassettes, 1-cooling core, 1- power supply. Just supply
the readily available consumables, and you are up and running!
Power red. 120V, 60Hz. Very good used condition, fully checked,
cleaned, guaranteed. Price: $795.00
MJ Research PTC-100 Thermal Cycler
96 Well Block w/ Hot Bonnet.
(Inv #8826) Compact solid-state Peltier controlled thermal cycler.
Easy programming interface for programming your protocols, and
managing file records. Pre-installed factory protocols can be
customized for your application. Power req.: 100-240V, 50/60Hz,
400W. Very good used condition, fully checked (multiple-cycle
runs performed), cleaned, guaranteed. Includes manual. Price:
$1695.00
MJ Research PTC-100 Thermal Cycler
96 Well Block w/ Hot Bonnet.
(Inv
#8827) Compact solid-state Peltier controlled thermal cycler.
Easy programming interface for programming your protocols, and
managing file records. Pre-installed factory protocols can be
customized for your application. Power req.: 100-240V, 50/60Hz,
400W. Very good used condition, fully checked (multiple-cycle
runs performed), cleaned, guaranteed. Includes manual. Price:
$1695.00
MJ Research PTC-100 Thermal Cycler
96 Well Block w/ Hot Bonnet.
(Inv
#8828) Compact solid-state Peltier controlled thermal cycler.
Easy programming interface for programming your protocols, and
managing file records. Pre-installed factory protocols can be
customized for your application. Power req.: 100-240V, 50/60Hz,
400W. Very good used condition, fully checked (multiple-cycle
runs performed), cleaned, guaranteed. Includes manual. Price:
$1695.00
Perkin Elmer Cetus DNA Thermal
Cycler. (Inv #7404, 7458) The Cetus thermal
cycler
allows for flexible temperature programming, step duration, and
rapid heating and cooling from step to step for consistent results.
Features a 48 position aluminum block for 0.5ml GeneAmp Reaction
Tubes. Temperature range 0-99°C, 16 programmable temperatures
per repeat cycle, and 99 cycles per repeat pattern. Accuracy:
±3°C of programmed temperatures from 4 to 32°C,
and ±1°C of programmed temperatures from 33 to 99°C.
Includes four pre-programmed files: Soak, Time Delay, Thermo-Cycle,
and Step-Cycle files, and 2 demonstration files: Gene-Amp Thermo-cycle,
and Gene-Amp Step-cycle. 93 programmable user files are available.
File modifications include, Automatic Segment Extension, Infinite
Post-PCR Subambient Incubation. Dim: 12"H x 13"W x 19.25"D.
Power red. 120V, 50/60 Hz, 1000W. Serial RS232 output. Very good
used condition, checked (the pre-programmed files along with several
custom programmed cycles were run and monitored for accuracy),
guaranteed. Price: $395.00
Perkin Elmer GeneAmp PCR System
9600. (Inv #8679) The GeneAmp PCR System
9600
automates the Polymerase Chain Reaction technique for DNA amplification.
Small discreet molecules to chromosome fragments may be amplified.
The 9600 utilizes a programmable heating/cooling block for rapid
uniform heating and cooling. The sample block is a 96-well aluminum
block. Each well uses 0.2ml micro reaction tubes.
Features of the 9600 are:
Reproducity of cycle times
Uniformity of PCR yields for samples
Sample block accommodates up to 96 samples
Thin-walled MicroAmp Reaction tubes allow efficient heat transfer
and improved equilibration times
Increased productivity-Rapid heating and cooling allowing more
samples to be run in a fixed amount of time
Heated cover assuring tubes fit tightly in the wells
Oil-free operation with the heated cover.
Included software allows for step programming and storage of
up to 150 individual programs. Dim: (HxWxD) 12" X 20"
X 24".
Weight: 90lbs. Shipping weight: 110lbs. Very good used condition,
fully tested (all diagnostic checks passed, including temperature
calibration, and temperature uniformity tests utilizing the correct
calibration equipment for this model PCR machine. Several
runs programmed and monitored for accuracy), cleaned, guaranteed.
Includes manual. Price: $995.00
PGC Scientific 8-Place Beta Shield
Microtube Rack. (Inv #8494) Uniquely designed rack
holds
up to two rows of 4 microcentrifuge tubes. Minimum wall thickness
is 8 mm (5/16 in.), providing adequate radiation shielding against
moderate amounts of beta radiation (P32 < 50 micro Ci and S35
< 500 micro Ci). Molded from clear acrylic and comes with a
removable lid. Wells are numbered for easy tube identification.
Dimensions: 9 x 5.6 x 4 cm. Excellent used condition, fully checked,
cleaned, guaranteed. Price: $13.50
Spectroline CA-DS34 Camera Adapter
for Fluorescence Analysis Workstation. (Inv #7557)
Size
is 5in x 5in. Very good used condition, checked, (no pinholes
in fabric), clean, guaranteed. Price: $82.00
Stratagene
Model 2400 Stratalinker UV Crosslinker. (Inv
#7787) Used to
crosslink DNA or RNA to nylon, nitrocellulose,
or nylon-nitrocellulose membranes. 30-60 second process, while
boosting hybridization signal. Can be operated in autocrosslink,
time, or energy modes. Includes 5 X 15W 254nm bulbs. Internal
dim. (WxDxH) 47.7cm X 34.3cm X 16.8cm. Power red. 115V, 60Hz,
2A. Very good used condition. checked, guaranteed. Price: $795.00
VWR TW-26 White Light Transilluminator,
by UVP. (Inv # 8264) View film
negatives
autoradiographs, X-ray film, microtiter plates, and stained gels.
Frosted glass surface is sealed into the base for durability.
Scratch and chemical-resistant work surface can be easily cleaned.
Epoxy coated steel housing. Power req: 115V, 50/60Hz, 0.375A.
Dim: DxWxH: 91/2 x 131/4 x 41/4". Very good used condition,
fully checked, cleaned, guaranteed. Price: $150.00